10 Inch Olsmopure K5633 Nano Silver
RM65.00
2″ INLINE GAC – 1/4″ Female NPT
- Granulated Carbon (GAC) has long been utilized to reduce impurities in potable water
- Ability to reduce dissolved organics and chemicals such as chlorine
Related products
Close
10 Inch P.P 1 Micron-A1
- Reduces scale,mud,silt, rust and sand particles
- Fine fibres are self-bonded in hot-melt form and never fall off
- 3 dimensional pores in 2 tier structure
- High dirt-holding capacity
- Recommended for use at incoming water main
Close
10 Inch AB
Material: PP sediment combining with granular activated carbon
Detail: With both effect of PP sediment and granular carbon filter cartridge, ensure the drinking water clear and safe
Close
Close
11 Inch Actibacteria Gac K-Pro (I Type)
| Iodine Number, mg/g | 1,050 Minimum |
|---|---|
| Methylene Blue, mg/g | 190 Minimum |
| Moisture, wt% | 5% Maximum |
| Ash, wt% | 1.5% Maximum |
| Surface Area, m2/g | 900 Minimum |
| Powder Particle Size: < 200 US Mesh, wt% | 90% Minimum |
| Typical apparent Density, g/ml | 0.30 |
| Granular Particle Size: < 12~50 US Mesh, wt% | 90% Minimum |
| Typical apparent Density, g/ml | 0.24 |
Close
10 Inch P.P 1Micron-Eco
- Reduces scale,mud,silt, rust and sand particles
- Fine fibres are self-bonded in hot-melt form and never fall off
- 3 dimensional pores in 2 tier structure
- High dirt-holding capacity
- Recommended for use at incoming water main
Close
11 Inch Sediment Filter K-Pro (U Type)
| Body Size | 10" |
|---|---|
| Flow Rate (gpm) | 0.5 |
| Max. Pressure (psi) | 125 |
| Max. Temperature (°F) | 100 |
Close
Filmtec Membrance – 100GPD
| Membrane Type | Polyamide Thin-Film Composite |
|---|---|
| Maximum Operating Temperature | 113° F (45°C) |
| Maximum Operating Pressure | 300 PSIG (21 bar) |
| Maximum Feed Flow Rate | 2.0 GPM (7.6 LPM) |
| pH Range, Short-Term Cleaning (30 min.) | 1 – 12 |
| Maximum Feed Silt Density Index (SDI) | 5 |
Close
Filmtec Membrance – 50GPD
| Membrane Type | Polyamide Thin-Film Composite |
|---|---|
| Maximum Operating Temperature | 113° F (45°C) |
| Maximum Operating Pressure | 300 PSIG (21 bar) |
| Maximum Feed Flow Rate | 2.0 GPM (7.6 LPM) |
| pH Range, Short-Term Cleaning (30 min.) | 1 – 12 |
| Maximum Feed Silt Density Index (SDI) | 5 |
WhatsApp us