11 Inch Actibacteria Gac K-Pro (I Type)
RM45.00
| Iodine Number, mg/g | 1,050 Minimum |
|---|---|
| Methylene Blue, mg/g | 190 Minimum |
| Moisture, wt% | 5% Maximum |
| Ash, wt% | 1.5% Maximum |
| Surface Area, m2/g | 900 Minimum |
| Powder Particle Size: < 200 US Mesh, wt% | 90% Minimum |
| Typical apparent Density, g/ml | 0.30 |
| Granular Particle Size: < 12~50 US Mesh, wt% | 90% Minimum |
| Typical apparent Density, g/ml | 0.24 |
Related products
Close
Itsaso Mineral Filter
Activating, purifying and mineralizing drinking water.
Close
20 Inch P.P 5Micron
(Available in 1 or 5 Micron)
- Removal ability of scale,mud,silt,dirt,rust,and sand particles
- Cartridges fit all standard housings
Close
Filmtec Membrance – 100GPD
| Membrane Type | Polyamide Thin-Film Composite |
|---|---|
| Maximum Operating Temperature | 113° F (45°C) |
| Maximum Operating Pressure | 300 PSIG (21 bar) |
| Maximum Feed Flow Rate | 2.0 GPM (7.6 LPM) |
| pH Range, Short-Term Cleaning (30 min.) | 1 – 12 |
| Maximum Feed Silt Density Index (SDI) | 5 |
Close
20 Inch P.P 1 Micron-Eco
- Reduces scale,mud,silt, rust and sand particles
- Fine fibres are self-bonded in hot-melt form and never fall off
- 3 dimensional pores in 2 tier structure
- High dirt-holding capacity
- Recommended for use at incoming water main
Close
11 Inch Ultra Membrane K-Pro (U Type)
Ultra Membranes with a pore size of 0.01 micron perform micro filtration. Microfiltration membranes remove all bacteria. Only part of the viral contamination is caught up in the process, even though viruses are smaller than the pores of a micro filtration membrane.This is because viruses can attach themselves to bacterial biofilm.Micro filtration can be implemented in many different water treatment processes when particles with a diameter greater than 0.1 mm need to be removed from a liquid.
Close
20 Inch Olsmopure Carbon Block
** Available in 10'', 20" lengths
- CTO Carbon Block (GA) removal chlorine, taste, smell, odor, etc...
- Standard Filter Cartridge Replacement
Close
11 Inch Mineral Stone & Alkaline K-Pro (U Type)
| Body Size | 10" |
|---|---|
| Flow Rate (gpm) | 0.8 |
| Max. Pressure (psi) | 125 |
| Max. Temperature (°F) | 100 |
| Chlorine Reduction | Class 1 |
| Service Life (gal to 2 years) | 5000 |
Close
Filmtec Membrance – 50GPD
| Membrane Type | Polyamide Thin-Film Composite |
|---|---|
| Maximum Operating Temperature | 113° F (45°C) |
| Maximum Operating Pressure | 300 PSIG (21 bar) |
| Maximum Feed Flow Rate | 2.0 GPM (7.6 LPM) |
| pH Range, Short-Term Cleaning (30 min.) | 1 – 12 |
| Maximum Feed Silt Density Index (SDI) | 5 |
